• Isolated measurement, isolated withstand voltage up to 3kV @50HZ, 1 minute

• Can measure DC and AC current

• Lowest current lead impedance: 0.8mΩ

• Ultra-wide current sensing range for sensing 1A currents

• Optional reference voltage modes: 2.5V, 0.5Vcc, 0.1Vcc

• Zero voltage hysteresis close to 0

• Response time as low as 2uS

• Wide operating temperature range: -40°C~85°C

• High accuracy: room temperature< 1% accuracy error

• Operating temperature zone:<6% accuracy error

• Strong drive capability for output ports to load as low as 2kΩ

• Extremely easy to use peripheral circuitry

• Fully integrated current solution with minimal footprint

• Lowest heat generation, suitable for heat treatment with high power in small space

• No need to debug the system according to the detection current, different selections can be solved

• Chip calibration programmed before leaving the factory to ensure high consistency

• Support wave soldering automatic SMD, tape and reel packaging

• Not interfered by wire magnetic field, external magnetic field, geomagnetic field

• High power supply rejection ratio

• Independent research and development, no technical dependence

SC8102 is a member of Xingsense Semiconductor's fully integrated Hall current sensor product line, which mainly promotes high-sensitivity current sensing to facilitate post-stage applications, and its ultra-wide dynamics detection capability, allowing customers to detect current ranges as low as 1A and up to 30A. Meet the user's detection of load current under the condition of insulation isolation, suitable for replacing power resistance, linear optocoupler, transformer and other passive or discrete sensor detection schemes.

Xinggansense Semiconductor's SC8102 series is an isolated current sensing chip that operates on the open-loop Hall sensor detection principle. By directing the current wire on the high side of the high-voltage side in the package body, based on the magnetic effect of current, the amount of isometric magnetic field generated around the measured wire is induced by the magnetic sensor of the built-in chip, and converted into a processable isometric voltage signal, which is read and amplified by the built-in high-precision ADC, and with digital calibration technology, environmental variables such as temperature, noise, hysteresis, nonlinearity and other environmental variables are removed, and the final output is a voltage value that is nearly ideally proportional to the measured current value to achieve isolated current measurement.

The SC8102 adopts fully automatic production and processing, which can provide customers with consistency, high quality and reliability, and low cost that cannot be matched by discrete solutions. Standard package

The design is very suitable for customers for batch automatic placement production, and is the best solution for home appliances, motor control, power supply and other applications.

Xingan Semiconductor Electronics is committed to the research of core chip technology, in order to bring customers the best current sensing solutions for the purpose.